Spinnaker Furler Sets NS 1.5 | NS Furling Gear — Buy an Affordable but Quality Spinnaker Furler

NS 1.5 Spinnaker Furling Systems

NS1.5 furler sets are assembled with a maximum compatibility in mind, the components matching the appropriate types of sails and boat sizes. We build these gennaker furling systems based on sailing experience, technical features and manufacturer’s advice.

Code Zero furling system for sails up to 60 sq.m and sailboats up to 36′

Code Zero Furler NS1.5

Furling drum and top swivel (1.5t working load)

€ 660

$ 720

NS Furling SoftLine up to 10 m

Control Line 8 mm – rope loop + NS38 block on a bungee cord (approx. 0.5 m) and a carabiner

Code Zero Furler NS1.5 is designed to handle sails with a «stretched» luff like Staysails, Code Zero and Code 1, Drifter, sailing catamaran Screecher, cruising asymmetric Spinnaker or Gennaker etc.

For us to calculate the required length of the endless rope kit for your boat, please indicate the distance from the spinnaker furler attachment point along the rubrail to the pushpit (or any other desired location on the boat).

Top-Down furling system for sails up to 80 sq.m and sailboats up to 36′

Asymmetrical Spinnaker Furler NS1.5 Top-Down

Furling drum with a tack ring and top swivel (1.5t working load)

€ 1150

$ 1260

NS Furling SoftLine up to 10 m

Control Line 8 mm – rope loop + NS38 block on a bungee cord (approx. 0.5 m) and a carabiner

NS Evo Torque Cable 9.5

Cable 9.5 mm – length 14 м – solid thimbles 10 mm – rope clamps 9.5 mm

for sailboats up to 32′

control line up to 12 m, thicker soft stay kit

Upgrade to 12 m loop, next size soft stay kit

Cable 11 mm – length 17 м – solid thimbles 10 mm – rope clamps 11 mm

for sailboats up to 36′

€ 140

$ 150

NS1.5 Top-Down Spinnaker Furler is designed to handle sails with a «soft» luff like asymmetrical spinnakers and gennakers, Code 2-6, reachers, large A-sails etc. Top-Down furler can be used as a universal set for sails with «soft» or «straight» luffs.

NS Evo Torque Cable set is meant for DIY assembly on the boat after precise measurements. Please find the video guide on the Soft Stay page.

NS1.5 furling system optional accessories

Upgrade to 57 mm ratchet block for the furling line

€ 55

$ 60

furling line stanchion mounted double fairleads

Stanchion mounted fairleads

3 double furling line leads

€ 105

$ 120

Adjustable pulpit blocks

2 control line leads

€ 110

$ 120

double blocks NS38 to lead furling line to cockpit

Furling line leading blocks

3 double NS38 blocks

€ 110

$ 120

NS57 Sheet Blocks

2 ball-bearing aluminum 57mm blocks

for sailboats up to 32′

€ 70

$ 80

NS75 Sheet Blocks

2 ball-bearing aluminum 75mm blocks

for sailboats up to 36′

€ 160

$ 180

Ratchet block provides an improved grip for the furling line to prevent accidental unfurling of the sail.

Stanchion mounted double fairleads will keep your furler’s continuous line organised and easy to remove from the boat. Additionaly, you may want to use adjustable blocks on the pulpit to set the control line properly feeded into the spinnaker furler.

Furling line leading double blocks can be attached to the side supports of the stanchion bases. If your stanchions are of different design, please consider using stanchion mounted fairleads.

To NS Furling Gear Catalogue

￩￫ x