Top-Down Spinnaker Furler G25 | NS Furling Gear

ns furling gear

Top-Down Spinnaker / Gennaker Furler G25

€ | $

Top-Down Spinnaker Furler G25 photo
  • tech data of g25 top-down furler
  • g25 top-down spinnaker furler
  • g25 top-down spinnaker furler
  • top-down furler principles drawing

Top-Down Spinnaker Furler NS Furling Gear G25 Top-Down is designed to handle sails with a «soft» luff like asymmetrical spinnakers and gennakers, Code 2-6, reachers, large A-sails etc.

It is imperative to use an anti-torsion stay for the Top-Down furling system to work properly. When you pull an endless control line, the torque cable transfers the rotation to the upper swivel. This way your sail will be furling from the top to the tack, tightly rolling the main girth of a spinnaker. At the same time the top-down swivel on the drum holds the tack of the sail in place preventing its furling until the last moment.

Top-Down furling system makes much easier to hoist and lower your asymmetric spinnaker or tack single handed.

G25 Top-Down furler is a universal set to use for sails with the “soft” or “straight” luffs. If you need to hoist different types of sails it is possible to use one NS Top-Down furler. The tack of Code Zero type sails should can be attached to the jaw of the drum and the tack of A-sails – to the lower swivel.

Gennaker furler G25TD is an analogue to following furlers: NS1.2 Top-Down, Selden GX7.5, Ronstan Series 80 Top Down, Facnor Fast FX+ 900, Karver KSF0.9 Top Down, Profurl Spinex 0.9.

G25TD furler set includes the drum, lower top-down tack swivel and the upper swivel. Top-Down swivel of this set keeps the tack of the sail while you are furling it from top to bottom. We are providing a ready to use 6 mm continuous control line and anti-torsion soft stay kits separately.

G25TD furling system is appropriate for:

  • any sails with the “soft” luff that is 8-10% longer than the distance from halyard exit to the tack attachment point;
  • sail area approx. 40 sq.m | 430 sq.ft or less;
  • control line diameter max 7 mm | 9/32″;
  • thimbles 6 mm | 15/64″ thick with a pin hole of 6 mm | 15/64″;
  • attaching with a 6 mm | 15/64″ shackle;
  • working load of 1’200 kg / 2’645 lbs;
  • boats up to 26 feet.

To NS Furling Gear Catalogue